You might be sitting to binge on your favorite Netflix show after a hectic day of work and realised you didn’t have a wi-fi signal. It’s a daunting and flustering experience right? This happens most of the time with growing spaces. The Wi-Fi signal is not powerful enough to outspread every square inch of your house.
However, there are some significant tips to fix the mishap. Therefore, fixing these Wi-Fi dead zones is quick and hassle-free. Follow our guide if you never want these frustrations to encounter you again.
How to Fix Wi-Fi Dead Zones?
1. Position your Router
Keep your router as close to the center of your house as possible. People often prefer to place their routers against the outside wall from where the DSL lines come in. This could be the easiest way but it is not that effective. However, you may opt for a place nearer to the bookshelf and make sure to avoid the closet area as the signal might be reduced as it has to surpass the wall.
Apart from that, choosing the area near the AC outlet and hardwired connection to your DSL will provide you an uninterrupted signal. However, it may sound complicated; but such kind of implementation will curtail the number of dead zones and dropped signals.
2. Update your Router and Boost the Signal
A network running on an outmoded router may provide various dead zones. Despite that, if you have purchased the router on your own and not from your ISP, make sure to check if it is older for at least two or three years. Moreover, running your wi-fi network on outdated hardware will significantly result in dead zones.
Therefore, make sure to check your router if it allows you to convert from the general 2.4 GHz to 5 GHz band. Therefore, such conversion to 5 GHz band will automatically help to uplift Wi-Fi speeds and performance while getting reduced due to dead zones.
3. Establish a Homeplug Network
Homeplug networking mainly uses existing electrical wiring to send internet connections from your router to every corner of your house. These are often sold in pairs along with an ethernet cable. However, one adapter is generally plugged into an outlet in the vicinity of the router and connected with the ethernet cable to the router. Another adapter is basically plugged into that zone where the connection is sluggish.
Well, the signal of HomePlug networking is smooth and hassle-free. It does not get affected by any kind of hindrance or walls. Make sure to buy the newer models which provide speed up to 500 Mbps.
These aforementioned three tips will definitely help you to fix all the mishaps of wi-fi dead zones in your home and office. Apart from these three tips, there are also innumerable ways to fix this issue such as managing your wi-fi network, setting up a mesh network, raising the antenna, and so on. However, you can execute these setup procedures all by yourself and if you don’t know how to, we will be happy to help you!